Products >> SWITCHING POWER SUPPLY >> S Series

DC LED switching mode Power Supply SingleOutput adjustable power supply 200w

Product No.：201664104842
Online Inquiry

Features:
High efficiency, high reliability and low cost
Switch input voltage range choice
100% full load and machine test
Protection characteristics: short circuit/overload
Air cooling
Working frequency 37 KHz

200W Single Output Switching Power Supply (SMPS) S-200W

MODEL S-200-5 S-200-12 S-200-24 S-200-27 S-200-48

DC VOLTAGE 5V 12V 24V 27V 48V

RATED CURRENT 40A 16.5A 8.3A 7.4A 4.2A

CURRENT RANGE 0 ~ 40A 0 ~ 16.5A 0 ~ 8.3A 0 ~ 7.4A 0 ~ 4.2A

RATED POWER 200W 200W 200W 200W 200W

RIPPLE & NOISE (max. ) 150mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p

VOLTAGE ADJ. RANGE 4.5 ~ 5.7V 10.6~ 13.2V 21 ~ 28V 24 ~ 30V 43 ~ 53V

VOLTAGE TOLERANCE ± 2.0% ± 1.0% ± 1.0% ± 1.0% ± 1.0%

LINE REGULATION ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5%

LOAD REGULATION ± 1.0% ± 0.5% ± 0.5% ± 0.5% ± 0.5%

SETUP, RISE, HOLD TIME 100ms, 50ms, at full load

VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC by switch 248 ~ 370VDC

FREQUENCY RANGE 47 ~ 63Hz

EFFICIENCY (Typ. ) 78% 82% 85% 86% 87%

AC CURRENT 3.2A/115VAC 16A/230VAC

INRUSH CURRENT (max. ) 4A/115VAC 36A/230VAC

LEAKAGE CURRENT < 3.5mA / 240VAC

OVERLOAD 105 ~ 135% rated output power

Protection type: Hiccup mode, recovers automatically after fault condition is removed.

OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 27.6 ~ 32.4V 33.7 ~ 39.2V 57.6 ~ 67.2V

Protection type: Hiccup mode, recovers automatically after fault condition is removed.

FAN CONTROL O. T. P. RTH1 ≥ 65º C FAN ON, ≤ 55º C FAN OFF, ≥ 70º C (5 ~ 15V)

RTH1 ≥ 70º C FAN ON, ≤ 65º C FAN OFF, ≥ 80º C (24 ~ 48V)

Protection type: Hiccup mode, recovers automatically after fault condition is removed.

WORKING TEMP. -10 ~ +60º C (Refer to output load derating curve)

WORKING HUMIDITY 20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY -20 ~ +60º C, 10 ~ 95% RH

TEMP. COEFFICIENT ± 0.03%/º C (0 ~ 50º C)

VIBRATION 10 ~ 500Hz, 2G 10min. /1cycle, 60min. each along X, Y, Z axes

SAFETY STANDARDS Design refer to UL1950

WITHSTAND VOLTAGE I/P-O/P: 1.5KVAC I/P-FG: 0.5KVAC O/P-FG: 0.5KVAC

ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC

MTBF 188.7K hrs min. MIL-HDBK-217F (25º C)

DIMENSION 199*110*50mm (L*W*H)

PACKING 20PCS /CTN 0.85KG