Products >> SWITCHING POWER SUPPLY >> S Series

S-35W

Product No.：201534143338
Online Inquiry

S single output switching power supply 48V PSU 35W 12V 24V 5v s-35w

Features :

• AC input range selected by switch

• Protections:Short circuit/Over load

• Cooling by free air convection

• LED indicator for power on

• Fixed switching frequency at 37KHz

• 2 years warranty

Model		S-35-5	S-35-12	S-35-15	S-35-24
Output	DC Voltage	5V	12V	15V	24V
	Rated Current	7A	3A	2.4A	1.5A
	Current Range	0~7A	0~3A	0~2.4A	0~1.5A
	Rated Power	35W	36W	36W	36W
	Ripple & Noise (max.) Note.2	75mVp-p	100mVp-p	100mVp-p	100mVp-p
	Voltage Adj. Range	4.75~5.5V	10.8~13.2V	13.5~16.5V	21.6~26.4V
	Voltage Tolerance Note.3	±2.0%	±1.0%	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±1.0%	±0.5%	±0.5%	±0.5%
	Setup,Rise, Hold time	200ms, 100ms, 30ms at full load
Input	Voltage Range	85 ~ 132VAC / 170 ~ 264VAC selected by switch 240 ~ 370VDC
	Frequency Range	47~63HZ
	Efficiency(Typ.)	70%	76%	78%	78%
	AC Current	0.8A/115VAC 0.45A/230VAC
	Inrush Current (max.)	COLD START 18A/115VAC 36A/230VAC
	Leakage Current	<2mA / 240VAC
Protection	Over Load	105 ~ 150% rated output power
		Protection type : Fold back current limiting, recovers automatically after fault condition is removed
Environment	Working Temperature	-10 ~ +60°c (Refer to output load derating curve)
	Working Humidity	20~90% RH Non-condensing
	Storage temp.& humidity	-20~+85°C, 10~95%RH
	Temp. coefficient	±0.03%/°C (0~50°C)
	Vibration	10 ~ 500Hz, 2G 10min./1 cycle,60min.each along X,Y,Z axes
Safety & EMC (Note 4.)	Safety Standards	Design refer to UL1012
	Withstand Voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI Conduction & Radiation	Design refer to FCC Part15 J Conduction Class B
Others	MTBF	435.2K hrs min. MIL-HDBK-217F (25°c )
	Dimension	1299838mm (LWH)
	Packing	0.41Kg; 30pcs/13.4Kg/0.86CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.