Products >> SWITCHING POWER SUPPLY >> LED waterproof&rain proof series

FY-200W

Product No.：2014312145641
Online Inquiry

LED RAIL-PROOF SWITCHING POWER SUPPLY LED DRIVER 200W

Feature :

Small size,light weight,high efficiency,long life,safety and reliablity

Built-in PFC function

Protections:Over voltage,Over current ,Over tem.,Short Circuit

Waterproof Rank:IP67

Ideal for outdoor LED lighting,LED street lights,LED tunnel lighting and so on

MODEL		FY-200-12 / 15V 24V
OUTPUT	DC VOLTAGE RANGE	12V 24V
	RATED CURRENT	16.6 A 13A 8.3A
	CURRENT RANGE	0~16.6A 0~13A 0~8.3A
	RATED POWER	200W
	RIPPLE & NOISE (max.) Note.2	150mVp-p
	VOLTAGE TOLERANCE Note.3	±10.0%
	LINE REGULATION	±1.0%
	LOAD REGULATION	±2.0%
	SETUP, RISE TIME	1500ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	20ms/230VAC 15ms/115VAC at full load
INPUT	VOLTAGE RANGE	170~264VAC 235~373VDC
	FREQUENCY RANGE	47~63HZ
	EFFICIENCY (Typ.)
	2.5	A/230VAC
	INRUSH CURRENT (max.)	COLD START 35A/115VAC 70A/230VAC
	LEAKAGE CURRENT	3.5mA/240VAC
PROTECTION	OVER LOAD	Above 105% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	27.6 ~ 32.4V
	OVER VOLTAGE	Protection type: Shut off o/p voltage, clamping by zener diode
ENVIRONMENT	WORKING TEMP	-10~+60°C (Refer to “Derating Curve”)
	WORKING HUMIDITY	20~90%RH non-condensing
	STORAGE TEMP., HUMIDITY	-20~+85°C 10~95%RH
	TEMP. COEFFICIENT	±0.03%(0~50°C)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY&EMC	SAFETY STANDARDS	UL8750, CSA C22.2 No. 250.0-08 approved ; Design refer to TUV EN60950-1
	WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC
	ISOLATION RESISTANCE	I/P-O/P:>100M Ohms / 500VDC / 25°C/ 70% RH
	EMC EMISSION	Compliance to EN55015, EN61000-3-2 Class A, EN61000-3-3
	EMC IMMUNITY	Compliance to EN61547, EN61000-4-2,3,4,5,6,8,11, light industry level(surge 2KV), criteria A
OTHERS

	PACKING	0.9Kg; 20pcs/20KG
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.