Model |
S-40-5 |
S-40-12 |
S-40-15 |
S-40-24 |
Output |
DC Voltage |
5V |
12V |
15V |
24V |
Rated Current |
8A |
3.5A |
2.8A |
1.8A |
Current Range |
0~8A |
0~3.5A |
0~2.8A |
0~1.8A |
Rated Power |
40W |
42W |
42W |
43W |
Ripple & Noise (max.) Note.2 |
75mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
Voltage Adj. Range |
4.75~5.5V |
10.8~13.2V |
13.5~16.5V |
21.6~26.4V |
Voltage Tolerance Note.3 |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load Regulation |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
Setup,Rise, Hold time |
300ms, 50ms, 60ms/230VAC 800ms, 50ms, 15ms/115VAC at full load |
Input |
Voltage Range |
85 ~ 132VAC / 170 ~ 264VAC selected by switch 240 ~ 370VDC |
Frequency Range |
47~63HZ |
Efficiency(Typ.) |
72%/115VAC |
76%/115VAC |
76%/115VAC |
78%/115VAC |
AC Current |
1.2A/115VAC 0.6A/230VAC |
Inrush Current (max.) |
COLD START 30A/115VAC 60A/230VAC |
Leakage Current |
<1mA / 240VAC |
Protection |
Over Load |
105 ~ 150% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed |
Over Voltage
|
5.75 ~ 6.75V |
13.8 ~ 16.2V |
17.25 ~ 20.25 |
27.6 ~ 32.4V |
Protection type : Hiccup mode, recovers automatically after fault condition is removed |
Environment |
Working Temperature |
-10 ~ +60°c (Refer to output load derating curve) |
Working Humidity |
20~90% RH Non-condensing |
Storage temp.& humidity |
-20~+85°C, 10~95%RH |
Temp. coefficient |
±0.03%/°C (0~50°C) |
Vibration |
10 ~ 500Hz, 2G 10min./1 cycle,60min.each along X,Y,Z axes |
Safety & EMC
(Note 4.)
|
Safety Standards |
UL1012, UL1950, TUV EN60950 Approved |
Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
EMI Conduction & Radiation |
Compliance to EN55022 (CISPR22) Class B |
Harmonic Current |
Compliance to EN61000-3-2,-3 |
EMS Immunity |
Compliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A |
Others |
MTBF |
314.1K hrs min. MIL-HDBK-217F (25°c ) |
Dimension |
129*98*38mm (L*W*H) |
Packing |
0.41Kg; 30pcs/13.9Kg/0.86CUFT |
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
|