COLOR MARK SENSOR PACKING SENSOR BZJ-311
Model and meaning:
1)Color mark sensor
2)Design program:1,2......
3)Class to light path: 1. coaxial, 2. non coaxial
4)Class to light source: 1.single light source, 2. double light source
5)Color of light source: R: white, G: green
6)Class to logic: N-NPN, P-PNP
型号Model |
BZJ-311 |
BZJ-312 |
外形尺寸Size(mm) |
38*62*100 |
工作电压Supply voltage |
10-30VDC |
使用环境温度Ambient temperature |
0℃~65℃ |
检测方式Detecting method |
同轴反射式Coaxial reflection |
设定距离Setting distance |
9mm±2mm |
光源色谱chromatogram of light |
红red、绿green、兰blue、白white |
光点Facula |
圆点Circular |
响应时间Response time |
50uS |
带载电流Current consumption |
<200mA |
输出方式Output type |
NPN PNP 模似量输出Analog output |
外壳材料Material |
金属Metal |
保护 protection |
RP-power protection, Load short - circuit protection |
重量 weight |
450g |
引出线Cable |
2m |
BK: BLACK : switch signal output (NPN)
WH: WHITE: analog signal output (PNP)
Notice: 1: Be sure to check the power supply is in line with the DC12 prior to power - 24 v + / - 10%, the highest do not exceed 40 v, otherwise may damage the color mark sensor.
2: To ensure high stability test, to ensure that be two things: one is the detection distance of rated offset, such as offset of 12 + 2 mm, when installation, must be that the offset is 12 mm, so that we can make the switch to have 4 mm up and down vibration stability region, and in the offset to 10 mm, the upper and lower vibration area is significantly reduced.;2 it is strictly according to the steps to adjust sensitivity.
3: When installation should prevent direct light into the optical lens or shading to take appropriate measures.
4: Working environment temperature, humidity, vibration, shock and other corrosive gases, are likely to affect the work of photoelectric switch, please pay attention to try to eliminate these effects.
5 : Pay attention to protect optical lens clean at ordinary times, avoid lens stand up when installation, to minimize dust.
|
|