120W Single
| Model Number |
Output |
Tol |
RCN |
Effi |
| S-120-3 |
3V,0~35.0A |
± 2% |
100mV |
70% |
| S-120-5 |
5V,0~24A |
± 2% |
100mV |
78% |
| S-120-7.5 |
7.5V,0~16A |
± 1% |
100mV |
80% |
| S-120-10 |
10V,0-12A |
± 1% |
100mV |
80% |
| S-120-12 |
12V,0-10A |
± 1% |
100mV |
81% |
| S-120-15 |
15V,0-8A |
± 1% |
100mV |
81% |
| S-120-18 |
18V,0-6.6A |
± 1% |
180mV |
82% |
| S-120-24 |
24V,0-5A |
± 1% |
240mV |
84% |
| S-120-27 |
27V,0~4.5A |
± 1% |
240mV |
84% |
| S-120-48 |
48V,0~2.5A |
± 1% |
240mV |
84% |
|
AC input voltage range
|
85~132VAC/170~264VAC selected by switch 47~63Hz,248~370VDC
|
|
Input current
|
2.4A/115V 1.2A/230V
|
|
AC Inrush current
|
Cold-start current 30A/115V 60A/230V
|
|
Leakage current
|
<1mA/240VAC
|
|
Overload protection
|
105 ~ 150% Protection type :pulsing hiccup shutdown Reset: auto recovery.
|
|
Temperature coefficient
|
±0.03%/°C(0~50°C)
|
|
Setup, rise, hold up time
|
200ms, 100ms, 30ms
|
|
Vibration
|
10~500Hz, 2G 10min,/1 cycle. Period for 60min,Each axes
|
|
Withstand voltage
|
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
|
|
Isolation resistance
|
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
|
|
Working temperature and humidity
|
-10°C~+60°C(Refer to output load derating curve),20%~90%RH
|
|
Store temperature and humidity
|
-20°C~+85°C,10%~95%RH
|
|
Overall dimension
|
199X98X38mm (L*W*H)
|
|
Weight
|
0.66kgS
|
|
Safety standards
|
Meet UL1012 requirement(Not apply for the mark)
|
|
EMC standards
|
Meet FCC PART 15J Conduction class B
|
|
Note
|
1. The parameter under the testing condition : 230vAC input ,rated load,25°C70% RH. Temperature.
2. Tolerance the setting tolerance, circuit stability and load stability.(Note:5).
3. Wave test: adopting "A12"double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test : the lowest voltage will be up to the highest voltage when the circuit overload.
5. Load stability test: The load is from 0% to 100%.
|
OVERALL DIMENSION(Unit:mm)
|
带显示导轨电源
接近开关
