乐清市楚希电气有限公司

中文版

ENGLISH

产品分类

联系我们

电话: 0577-61510353
传真: 0577-61510353
E-mail: info@chance-electric.com
E-mail: yqchux@126.com
地址: 浙江省乐清市新光工业区柳乐路63号乐清市电子商务产业园8楼801
Skype: zheng.janson
QQ: 3572813688

产品 > 工业开关电源 > 单组S系列开关电源 > S系列开关电源S-250W

产品名称 : S系列开关电源S-250W

型号 : 2014312104334

放大

←[上一个产品] [下一个产品]→

产品详细:

SPECIFICATION

Model Specification	S-250-5	S-250-7.5	S-250-12	S-250-13.5	S-250-15	S-250-24	S-250-27	S-250-48
DC Output voltage	5V	7.5V	12V	13.5V	15V	24V	27V	48V
Output voltage range(Note:2)	±2%	±2%	±1%	±1%	±1%	±1%	±1%	±1%
Rated output current	45 A	33A	20A	18A	16.5A	10A	9A	5A
Output current range	0~45A	0~33A	0~20A	0~18A	0~16.5A	0~10A	0~9A	0~5A
Wave and noise(Note:3)	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p	100mVp-p	100mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±1%	±1%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
DC output power	225W	240W	240W	240W	240W	240W	240W	240W
Efficiency	74%	79%	83%	83%	84%	85%	85%	86%
Adjustable range for DC voltage	4.5~5.6V	6~9V	10~13.2V	12~15V	13.5~18V	20~26.4V	26~32V	41~56V
AC input voltage range	90~132VAC/180~264VAC selected by switch 47~63Hz,254~370VDC
Input current	3.6A/115V 108A/230V
AC Inrush current	25A/115V 50A/230V
Leakage current	<3.5mA/240VAC
Overload protection	105 ~ 150% Protection type :pulsing hiccup shutdown Reset: auto recovery.
Setup, rise, hold up time	200ms, 100ms, 20ms
Vibration	10~500Hz, 2G 10min,/1 cycle. Period for 60min,Each axes
Working temperature and humidity	-10°C~+60°C(Refer to output load derating curve),20%~90%RH
Overall dimension	199X110X50mm (LWH)
Weight	0.9kgS
Safety standards	Meet UL1012 requirement(Not apply for the mark)
EMC standards	Meet FCC PART 15J Conduction class A
Note	1. The parameter under the testing condition : 230vAC input ,rated load,25°C70% RH. Temperature. 2. Tolerance the setting tolerance, circuit stability and load stability.(Note:5). 3. Wave test: adopting "A12"double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test : the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%.