Model |
S-15-5 |
S-15-12 |
S-15-15 |
S-15-24 |
Output |
DC Voltage |
5V |
12V |
15V |
24V |
Rated Current |
3A |
1.3A |
1A |
0.7A |
Current Range |
0~3A |
0~1.3A |
0~1A |
0~0.7A |
Rated Power |
15W |
15.6W |
15W |
16.8W |
Ripple & Noise (max.) Note.2 |
50mVp-p |
50mVp-p |
50mVp-p |
100mVp-p |
Voltage Adj. Range |
4.75~5.5V |
10.8~13.2V |
13.5~16.5V |
21.6~26.4V |
Voltage Tolerance Note.3 |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load Regulation |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
Setup,Rise, Hold time |
200ms, 100ms, 30ms at full load |
Input |
Voltage Range |
85 ~ 132VAC / 170 ~ 264VAC selected by switch 240 ~ 370VDC |
Frequency Range |
47~63HZ |
Efficiency(Typ.) |
65% |
68% |
70% |
72% |
AC Current |
0.5A/115VAC 0.25A/230VAC |
Inrush Current (max.) |
COLD START 15A/115VAC 30A/230VAC |
Leakage Current |
<0.5mA / 240VAC |
Protection |
Over Load |
105~150% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed. |
Over Voltage |
5.75V~6.75V |
13.8V~16.2V |
17~18.5V |
27.6V~32.4V |
Protection type : Fold back current limiting, recovers automatically after fault condition is removed |
Environment |
Working Temperature |
-10 ~ +60°c (Refer to output load derating curve) |
Working Humidity |
20~90% RH Non-condensing |
Storage temp.& humidity |
-20~+85°C, 10~95%RH non-condensing |
Temp. coefficient |
±0.02%/°C (0~50°C) |
Vibration |
10 ~ 500Hz, 2G 10min./1 cycle,perriod for 60min.each along X,Y,Z axes |
Safety & EMC
(Note 4.)
|
Safety Standards |
Design refer to UL1012 |
Withstand Voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
EMI Conduction & Radiation |
Design refer to FCC Part15 J Conduction Class B |
Others |
MTBF |
522.1K hrs min. MIL-HDBK-217F (25°c ) |
Dimension |
99*97*36mm (L*W*H) |
Packing |
0.31Kg; 45pcs/15Kg/0.9CUFT |
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
3. Tolerance: includes set up tolerance, line regulation and load regulation. |