| Model |
|
MDR-60-5 |
MDR-60-12 |
MDR-60-24 |
MDR-60-48 |
| Output |
DC output Voltage |
5V |
12V |
24V |
48V |
| Voltage tolerance |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Rated Current |
10A |
5A |
2.5A |
1.25A |
| Related Power |
50w |
60w |
60w |
60w |
| Wave&Noise |
80mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
| Voltage ADJ range |
5-6V |
12-15V |
24-30V |
48-56V |
| Set up,rise time |
500ms 30ms/230VAC 500ms,30ms/115VAC at full load |
| hold up time |
120ms/230VAC 25ms/115VAC at full load |
| Input |
Voltage Range |
85 ~ 264VAC 47-63HZ 120-370VDC |
| Input Current |
1.8A/115VAC 1A/230VAC |
| Efficiency |
78% |
86% |
88%% |
87% |
| AC inrush current |
Cold start current 30A/115V 60A/230VAC |
| Leakage current |
<1mA/240VAC |
| Protection |
Overload |
Above 105% rated output power |
| hiccup mode, recovery automatically after fault condistion is removed |
| Over voltage |
6.25-7.25V |
15.6-18V |
31.6-36V |
57.6-64.8V |
| Shut down o/p voltage, re-power on to recover |
| Function |
DC OK active single |
Relay contact rating(max) :30V/1A resistive |
| Environment |
Working temp humidity |
-20~+70°C 20%~90%RH |
| Stor temp, humidity |
-20~+85°C 20%~90%RH Non-condensing |
| Safety |
safety standards |
UL508,TUV EN60950-1 approved |
| Withstand voltage |
I/P-O/P:3KVAC I/P-FG:2KVA O/P-FG:0.5KVA |
| Isolation resistance |
I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25 /70%RH |
| EMC emission |
Compliance to EN55011,EN55022,EN61204-3 class B,EN61000-3-2,-3 |
| Size |
size |
40*90*100mm (W*H*D) |
| Package |
0.33kg,42pcs/15kg |
| Note:1.All parameters not specially mentioned are measured at 230VAC input, related load and 25 of ambient temperature.2.Wave&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.3.Tolerance: includes set up tolerance, line regulation and load regulation. |
带显示导轨电源
接近开关
